FDIS CIRCULATED

TC 172

Optics and optical instruments

Period from 18 december 2001to 11 ganuary 2002these final draft international standards have been submitted to the iso member bodies for formal approval by the date shown available in English only

ISO /FDIS 15795

Optics and optical instruments – quality evaluation of optical systems- assessing the image quality degradation due to chromatic aberrations

2002-02-27

TC 188

Small craft

Vote terminates

ISO /FDIS 12215-2

Small craft – hull construction and scantlings – part 2: materials : core materials for sandwich construction, embedded materials

2002-03-17

TC 8

Ships and marine technology

 ISO/FDIS15748-1

Ships and marine technology – potable water supply on ships and marine structures – part1: planning and design

2002-03-17

ISO/FDIS 12215-3

Small craft – hull construction and scantlings – part3: materials : steel aluminium alloys, wood . other materials

2002-03-17

ISO /FDIS 15748-2

Ships and marine technology potable water supply on ships and marine structures – part2: method of calculation

2002-03-17

ISO/FDIS12215-4

Small craft – hull construction and scantlings- part4: workshop and manufacturing

2002-03-17

IEC/FDIS 62065

Maritime navigation and radio communication equipment and systems – track control systems operational and performance requirements, methods of testing and required test results

2002-03-03

ISO/FDIS 12217-3

Small craft – stability and buoyancy assessment and categorization

 Part3:  boats of hull length less than 6m

2002-03-10

TC 59

Building construction

TC 207

Environmental management

ISO /FDIS 14050

Environmental management – vocabulary (revision of iso 14050:1998:iso 14050: 1998/damd 1)

2002-03-17

ISO /FDIS 9046

Building construction – jointing products – determination of adhesion/cohesion properties of sealants at constant temperature (revision of iso 9046:1987)

2002-03-17

JTC1

Information technology

TC 61

PLASTICS

ISO/IEC12207:1995/FDAMD1

Information technology- software life cycle processes- amendment1

2002-03-10

ISO /FDIS 8974

Plastics- phenolic resins – determination of residual phenol content by gas chromatography (revision of iso 8974:1997)

2002-03-24

ISO/IEC 14496-4:2000/FDAMD1

Information technology – coding of audio- visual objects part4: conformance testing amendment1: conformance testing extensions

2002-03-10

TC 138

Plastics pipes fittings and valves for the transport of fluids

ISO/IEC FDIS 15938-3

Information technology – multimedia content description interface part3:visual

2002-03-10

ISO/FDIS 727-1

Fittings made from unplasticized poly (vinyl chloride ) (pvc-u) chlorine ated poly (vinyl chloride) ( pvc-c )n or acrylonitrille /butadiene/styrene (abs)n with plain sockets for pipes under pressure – part 1: metric series ( revision of iso 727:1985) 

2002-03-10

ISO /FDIS 727-2

Fittings made from unplasticized poly ( vinyl chloride ) (pvc-u) chlorine ated poly ( vinyl choride ) (pvc-c) or acrylonitrile/butadiene /styrene ( abs) with plain sockets for pipes under pressure – part2: lnch – based series

2002-03-10

STANDARDS PUBLISHED

TC 145

Graphical symbols

New international  standards published between 18 december 2001and 11 january 2002

Available in English only

French version of standard previously published in English only price group

ISO /FDIS 7000

Graphical symbols for use on equipment – index and synopsis (revision of iso 7000: 1989)

2002-03-31

TC 159

Ergonomics

TC 6

Paper, board and pulps

ISO/ FDIS 8995

Lighting of indoor work places ( revision of iso 8995:1989)

2002-03-03

ISO 1762:2001

Paper , board and pulps- determination of residue ( ash) on ignition at 525 degrees c

B

TC 10

Technical product documentation

p

ISO 13909-3:2001

Hard coal and coke- mechanical sampling – part 3: coal – sampling from stationary lots

K

ISO15787:2001

Technical product documentation – heat – treated ferrous parts – presentation and indications

TC 17

Steel

Iso 13909-4:2001

Hard coal and coke – mechanical sampling – part 4: coal – preparation of test samples

N

Iso 10384:2001

Hot – rolled carbon steel sheet as defined by chemical composition

F

Iso 13909-5:2001

Hard coal and coke  mechnical sampling – part 5: coke – sampling frommoving streams

N

TC 22

Road vehicles

ISO 2346:2001

Road vehicles- m14*1.25 compact spark – plugs with flat seating and 19 mm hexagon and their cylinder head housing

C

Iso 13909-6: 2001

Hard coal and coke  mechnical sampling – part 6: coke – preparation of test samples

M

Iso 3560:2001

Road vehicles – frontal fixed barrier or pole impact test procedure

G

Iso 13909-7:2001

Hard coal and coke  mechnical sampling – part 7:methods for determining the precision of sampling, sample preparation and testing

R

Iso 4020:2001

Road vehicles- fuel filters for diesel engines – test methods

T

Iso 13909-8:2001

Hard coal and coke – mechanical sampling – part8:methods of testing for bias

P

Iso 4141-4:2001

Road vehicles – multi core connecting cables – part 4: articulation test method and requirements for coiled cable assemblies

B

TC 29

Small tools

Iso 6549:1999

Road vehicles – procedure for h- and r- point determination

E

Iso 12164-1:2001

Hollow taper interface with flange contact surface – part1: shanks - dimensions

F

Iso 8716:2001

Road vehicles- fifth wheel kingpins strength test

B

Iso 12164-2:2001

Hollow taper interface with flange contact surface – part2: receivers- dimensions

C

Iso 8718:2001

Road vehicles- drawbar coupling and eyes for hinged drawbars – strength tests

B

TC 31

Iso 4000-1:2001

Tyres, rims and valves

Passenger car tyres and rims- part 1: tyres (metric series)

Q

Iso 10605:2001

Road vehicles – test methods for electrical disturbances from electrostatic discharge

K

Iso 5751-1:2001

Motorcycle tyres and rims ( metric series ) part1: design guides

G

Iso 12364:2001

Two – eheeled motorcycles- antilock braking systems (abs) – tests and measurement methods

H

TC 34

Food products

Iso 12

366:2001

Two – wheeled mopeds- antilock braking systems (abs) – tests and measurement methods

Iso   1446:2001

Green coffee – determination of water content- basic reference method

D

Iso 3727-1:2001

Butter-determination of moisture , non – fat solids and fat contents – part1: (reference method)

C

Iso /ts 15007-2:2001

Road vehicles – measurement of driver visual behaviour with respect to transport information and control systems- part2: equipment and procedures

D

Iso 3727-2:2001

Butter- determination of moisture , non – fat solids and fat contents part2: determination of non – fat solids conten(reference method)

C

TC 23

Tractors and machinery for agriculture and forestry

Iso 5555:2001

Animal and vegetable fats and oils sampling

M

Iso 6533:2001

Forestry machinery – portable chain-saw  front hand – guard – dimensions and clearances

C

Iso 5944:2001

Milk and milk – bassed products – detection of coagulase- positive staphylococci – most probable number technique

G

TC 24

Sieves, sieving and other sizing methods

Iso 6651:2001

Animal feeding stuffs – semi- quantitative determination of aflatoxin b1- thin – layer chromatographic methods

G

Iso 13318-2:2001

Determination of particle size distribution by centrifugal liquid sedimentation methods – part2: photocenbtrifuge method

H

Iso 8968-1:2001

Milk – determination of nitrogen content – part1: kjeldahl method

F

TC 27

Solid  mineral fuels

Iso 13909-1:2001

Hard coal and coke – mechanical sampling – part1: general introduction

E

Iso 8968-2:2001

Milk – determination of nitrogen content – part2: block- digestion method (macro method)

E

Iso 13909-2:2001

Hard coal and coke – mechanical sampling – part2: coal – sampling from moving streams

P

Iso 8968-4:2001

Milk – determination of nitrogen content – part4: determination of non- protein – nitro gen content

C

ISO 8968-5:2001

Milk- determination of nitrogen content – part 5: determination of protein – nitrogen content

C

TC 58

Gas cylinders

TC35

Paints and varnishes

Iso /tr 12391-1:2001

Gas cylinders – refillable seamless steel performance tests- part 1: philosophy background and conclusions

G

Iso 8501-3:2001

Preparation of steel substrates before application of paints and related products visual assessment of surface cleanliness part3: preparation grades of welds,cut edges and other areas with surface imperfections

C

TC 59

Iso 9047:2001

Building construction

Building construction- jointing products- determination of adhesion/ cohesion properties of sealants at variable temperatures

C

Iso 15741:2001

Paints and varnishes – friction – reduction coatings for the interior  of on- and offshore steel pipelines for non- corrosive gases

L

TC 60

Iso 13691:2001

Gears

Petroleum and natural  gas industries high speed special – purpose gear units

V

Tc 38

Textiles

Tc 61

Plastics

Iso 105-co9:2001

Textiles – tests for colour fastness – part co9: colour fastness to domestic and commercial laundering – oxidative bleach response using a non – phosphate reference detergent incorporating a low temperature bleach activator

C

Iso 178:2001

Iso 294-4:2001

Plastics-determination of flexural properties

Plastics- injection moulding of test specimens of thermoplastic materials part4: determination of moulding shrinkage

H

E

Tc 42

Photography

Iso 418:2001

Photography – processing chemicals – specifications for anhydrous sodium sulfite

D

Iso 1043-1:2001

Plastics- symbols and abbreviated terms – part 1: basic polymers and their special characteristics

F

Iso 3627:2001

Photography – processing chemicals specifications for anhydrous sodium metabisulfite

D

Iso 1624:2001

Plastics – vinyl chloride homopolymer and copolymer resins- sieve analysis in water

C

Iso 6851:2001

Photography – processing waste determination of total amino nitrogen (microdiffusion kjeldahl method)

E

Iso 8257-2:2001

Plastics- poly(methyl methacrylate) ( pmma) moulding and extrusion materials – part 2:preparation of test specimens and determination of properties

C

Iso 6853:2001

Photography – processing waste determination of ammoniacal nitrogen (microdiffusion method)

D

Iso 11003-1:2001

Adhesives – determination of shear behaviour of structural adhesives part 1: torsion test method using butt- bonded hollow cylinders

E

Iso 7760:2001

Photography – processing waste determination of hydroquinone

D

Iso 11003-2:2001

Adhesives – determination of shear behaviour of structural adhesives part 2:tensile test method using thick adherends

G

Tc 44

Welding and allied processes

M

Iso 11403-1:2001

Plastics- acquisition and presentation of comparable multipoint data- part1: mechanical properties

G

Iso 6520-2:2001

Welding and allied processes classification of geometric imperfections in metallic materials – part 2: welding with pressure

Iso 15618-1:2001

Qualification testing of welders for underwater welding – part 1: diver- welders for hyperbaric wet welding

N

Tc 67

Materials ,equipment and offshore structures for petroleum and natural gas industries

Iso 15618-2:2001

Qualification testing of welders for underwater welding – part 2: diver- welders and welding operators for  hyperbaric dry welding

L

Iso 13705:2001

Petroleum and natural gas industries fired heaters for general refinery service

XE

Tc 45

Rubber and rubber products

Iso 15156-1:2001

Petroleum and natrural gas industries materials for use in h 2s – containing e nvironments in oil and gas production – part 1: general principles for selection of cracking – resistant materials

E

Iso 2285:2001

Rubber , vulcanized or thermoplastic determination of tension set under constant elongation , and of tension set , elongation and creep under constant tensile load

E

Iso 16070:2001

Petroleum and natural gas industries – downhole equipment- lock mandrels and landing nipples

M

Iso 6916-2:2001

Flexible cellular polymeric materials sponge and expanded cellular rubber products- specification – part 2: mouldings and extrusions

K

Tc 76

Transfusion , infusion and injection equipment for medical and pharmaceutical use

Iso 7617-1:2001

Plastics – coated fabrics for upholstery – part 1: specification for pvc – coated knitted fabrics

J

Iso 8362-3:2001

Injection containers and accessories – part 3: aluminium caps for injection vials

B

ISO 11040-5:2001

Prefilled syringes – part 5: plungers for injectables

B

TC 31

Fluid power systems

TC 85

Nuclear energy

Iso 3968:2001

Hydraulic fluid power- filters- evaluation of differential pressure versus flow characteristics

F

Iso 12790-1:2001

Radiation protection – performance criteria for radiobioassay – part 1: general principles

P

Iso 16030:2001

Pneumatic fluid power – connections ports and stud ends

G

Iso 14152:2001

Neutron radiation protection shielding – design principles and considerations for the choice of appropriate materials

W

Iso 16589-1:2001

Rotary shaft lip – type seals incorporating thermoplastic sealing elements- part1: nominal dimensions and tolerances

G

TC 94

Personal safety – protective clothing and equipment

Iso 16589-2:2001

Rotary shaft lip – type seals incorporating thermoplastic sealing elements- part2:vocabulary

J

Iso 11393-5:2001

Protective clothing for users of hand- held chain – saws – part5: test methods and performance requirements for protective gaitres

G

Iso 16589-3:2001

Rotary shaft lip – type seals incorporating thermoplastic sealing elements- part3: storage . handing and installation

E

TC 98

Bases for design of structures

Iso 16589-4:2001

Rotary shaft lip – type seals incorporating thermoplastic sealing elements- part4:

Performance test procedures

G

Iso 3010:2001

Basis for design of structures – seismic actions on structures

R

Iso 16589-5:2001

Rotary shaft lip – type seals incorporating thermoplastic sealing elements- part5:

Identification of visual imperfections

J

Iso 13822:2001

Basses for design of structures assessment of existing structures

Q

TC 106

Dentistry

Tc 135

Non- destructive testing

Iso 6876:2001

Dental root canal sealing materials

E

Iso 9934-1:2001

Non – destructive testing – magnetic particle testing – part1: general principles

G

TC 113

Hydrometric determinations

Tc 146

Air quality

Iso/TR 14685: 2001

Hydrometric determinations- geophysical  logging of boreholes for hydrogeological purposes – considerations and guidelines for making measurements

R

Iso 8518:2001

Workplace air- determination of flame or electrothermal atomic absorption spectrometric method

P

TR 118

Compressors. Pneumatic tools and pneumatic mavhines

Tc 147

Water quality

Iso 8573-5:2001

Compressed air- part5: test methods for oil vapour and organic solvent content

F

Iso 6107-3:1993/amd1:2001

Water quality – vocabulary – amendment1

Xz

TC 119

Powder metallurgy

Iso 10705-4:2001

Water quality-detection and enumeration of bacteriophages-part4: enumeration of bacteriophages infecting bacteroides fragilis

K

Iso  4490:2001

Metallic powders – determination of flow time by means of a calibrated funnel (hall flowmeter)

B

Tc 158

Analysis of gases

TC 123

Plain bearings

Iso 6145-2:2001

Gas analysis – preparation of calibration gas mixtures using dynamic volumetric methods – part2: volumetric pumps

D

Iso 12168-1:2001

Plain bearings- hydrostatic plain journal bearings without drainage grooves under steady –state conditions – part1: calculation of oil – lubricated plain journal bearings without drainage grooves

P

TC 159

Ergonomics

Iso 12168-2:2001

Plain bearings- hydrostatic plain journal bearings without drainage grooves under steady –state conditions – part2: characteristic values for the calculation of – oil lubricated plain journal  bearings without drainage grooves

G

Iso 13406-2:2001

Ergonomics  requirements for work with visual displays based on flat panels part2: ergonomic requirementsfor flat panel displays

Xb

TC 130

Graphic technology

E

iso 13731:2001

Ergonomics of the thermal environment vocabulary and symbols

Q

Iso 12647-5:2001

Graphic technology – process control for the manufacture of half – tone colour separations, proof and production prints part5: screen printing

E

ISO/TR 11548-1:2001

Communication aids for blind persons-identifiers and shift marks

L

ISO/TR 11548-2:2001

Communication aids for blind persons identifiers, names and assignation to coded character sets for 8-dot Braille characters- part 2: latin alphabet based character sets

s

Iso 20869:2001

Footwear- test methods for outsoles insoles , lining and insocks – water soluble content

C

TC 184

Industrial automation systems and integration

Iso 20870:2001

Iso 20871:2001

Footwear- ageing conditioning

Footwear- test methods for outsoles abrasion resistance

B

D

Iso 10303-24:2001

Industrial automation systems and integration – product data representation and exchange – part 24: implementation methods : c language binding of standard data access interface

xb

Iso 20872:2001

Iso 20873:2001

Footwear- test methods for outsoles tear strength

D

TC 188

Small craft

Iso 20874:2001

Footwear – test methods for outsoles needle tear strength

C

Iso 11812:2001

Small craft – watertight cockpits and quick- draining cockpits

R

Iso 20875:2001

Footwear – test methods for outsoles determination of split tear strength and delamination resistance

C

TC 190

Soil quality

Iso 10381-3:2001

Soil quality – sampling – part 3: guidance on safety

L

Iso 20876:2001

Footwear – test methods for insoles

B

TC 192

Gas turbines

Iso 20877:2001

Footwear – test methods for whole shoe thermal insulation

C

Iso 3977-5:2001

Gas turbines – procurement – part 5: applications for petroleum and natural gas industries

B

JTC1

Information technology

R

TC 206

Fine ceramics

Iso 17562:2001

Fine ceramics (advanced ceramics, advanced technical ceramics)- test method for linear thermal expansion of monolith ic ceramics by push – rod technique

E

Iso /iec 7812-1:2000/cor 1:2001

Identification cards – identification of issuers- part1: numbering system technical corrigendum1

Free

TC 213

Dimentsional and geometrical product specifications and verification

Iso / iec 8824-3:1998/cor 1:2001

Information technology – abstract syntax notation one ( asn.1): constraint specification – part 3: technical corrigendum1

Free

Iso 5436-2:2001

Geometrical product specifications (gps) – surface texure: profile method: measurement standards – part2: software measurement standards

H

Iso /iec  9314-26:2001

Information technology –fibre distributed data interface (fddi) – part26: media access control conformance testing (mac- ats)

W

Iso 10360-2:2001

Geometrical product specifications (gps) – acceptance and reverification tests for coordinate measuring machines (cmm)- part 2: cmms used for measuring size

F

Iso/iec 9594-4:1998/cor 1:2001

Information technology – open systems interconnection – the directory : procedures for distributed operation – part 4: technical corrigendum1

Free

Iso 10360-6:2001

Geometrical product specifications (gps) – acceptance and reverification tests for coordinate measuring machines (cmm)- part 6: estimation of errors in computing gassian associated features

K

Iso /iec 9594-6:1998/cor 1:2001

Information technology – open systems interconnection – the directory :selected attribute types – part6: - technical  corrigendum1

Free

TC 215

Health informatics

Iso / iec 11544: 1993/cor 2:

Information technology – coded represent tation of picture and audio information progressive bi- level image compression technical corrigendum2

Free

Iso / tr 18307: 2001

Health informatics – interoperability and compatibility in messaging and communi cation standards – key characteristics

x

Iso/iec 13240:2001

Information technology – document description and processing languages interchange  standard for multimedia interactive documents ( ismid)

V

TC 216

Footwear

Iso 20866:2001

Footwear – test methods for insoles delamination resistance

C

Iso /iec 13818-2:2000/amd 1:2001

Information technology – generic coding of moving pictures and associated audio information: video – part2: amendment 1: video elementary stream content description data

Xz

Iso 20867:2001

Footwear – test methods for insoles heel pin holding strength

C

Iso 20868:2001

Footwear – test methods for insoles abrasion resistance

C

Iso/iec 14496-3:2001

Information technology – coding of audio – visual objects – part 3: audio

XQ

Iso/ iec 14519:2001

Information technology- posix ada language interface (api)

xp

Iso 9411-2:1993

(replaced by iso 13909-1:2001 & iso 13909-5: 2001 & iso 13909-6:2001)

Iso/iec 14776-2232:2001

Information technology – small computer system interface ( scsi) – part 232: serial  bus orotocol-2(sbp-2)

x

Tc 45

Rubber and rubber products

Iso/iec 15292:2001

Information technology – security techniques- protection profile registration procedures

G

Tc 213

Dimensional and geometrical product specifications and verification

Iso/iec 15444-1:2001

Information technology –   jpeg 2000 image coding system- part 1: core coding system

XE

Iso 5436:1985

(replaced by iso 5436-2:2001)

Iso/iec 20062:2001

Information technology – 8 mm wide magnetic tape cartridge for information interchange – helical scan recording – vxa-1 format

W

Meeting calendar

Iso/iec tr 21000-1:2001

Information technology –multimedia framework (mpeg-21)- part 1: vision , technologies and strategy

V

(update at 17 january 2002) meetings called for the month of February are not repeated in this edition . information definite but meeting not yet formally convened provisional